User Manual Lii-S6

Cautions:

1.Thischarger can chargeallcylindricalrechargeablebatteries 3.7VLi-Ion,3.8VIMR,1.2VNi-MH/Cd, 3.2VLiFePO4

2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.If DC input, only12V3Ais recommended

4.Mindheating while charging

5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.For indoor use only

7.The displaying dataonlyfor reference, pleaserefer to professional instrument for more accurate data

Specifications and functions:

1.Multi-powerinput: 12V 3A adapter(selective),four independent charging and micro computer management system.

2.Charge current intelligent auto-set of total three levels:500mA/700mA /1000mA/2000mA),2000mAis fixed only for slot#1/3/6.

3.Multi-functionalLEDchargingindicators: forcharging progress: 25% - 50% - 75% -100%,battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V(IMR) and for charging current: 0.5A/1A/2A

4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)

5.Refresh for OV battery. Itwill notcharge any battery of1.65 -2.20V (refresh current can be detected only)

6.Multi-safety protection function of over-charge and over-discharge,short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.Chargingatconstant voltage and current

Button and LED :

1.Buttonof Mode: Whilepower supplyis connected,  1)Short clickthemodebutton to change the battery type. It will start to charge9seconds after setting the battery type (3.2V or 3.80V),  1.2V Ni-MH and 3.7V li-ion canbe detected automatically, so it needssettingonly 3.2V and 3.8V batteries; 2) During charging process, shortclickthe mode button todisplay battery type.

Note: Battery type can be only selective before charging starts.

2.LED: Whilepower supply connected, all LEDSlight up immediately  1) If no battery isinserted,the500mAh LED(one of the three current display LEDS ) willkeep on and others willbe off.  2) When battery isinserted anddetected, 4 LEDcharging indicator for the channelwill beonamong which3.7Vbattery typeLED keepsflashingindicatingto set the battery type, if no operationin5 seconds, it beginsbyautomaticdetection(Li-Ion 3.7V or NIMH)thenfour LEDindicatorswill display the charging status. 3)During charging, short clicktheModebuttontoshow the battery typewithin5 seconds;4)If nopower supplyis connected, insertinga battery, itcan quick shows the remainingchargervolumeof the battery.

*LED displaygraphic reference:

Electrical Parameters:

1. Input :  DC 12V 3A(selective);

2. Output voltage: DC 4.2V for Li-Ion 3.70V

DC 4.35V for Li-Ion 3.85V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA*3(only for slot#1/3/6),

1000mA*6/700mA*6 /500mA*6

NiMH/NiCd:  500mA

4. Constant voltage, cut-off current: less than 100mA;

5. Standby current: less than 15mA.

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

lii-S6 Size and weight:

157.0mm× 149.0mm×36.5mm (L x W x H)

Weight:  560g