Description

Features:

1. The initial viscosity is super strong, and the damage level is reached in a very short time.

2. This product is suitable for: weather block, handle, door bowl, window trim, anti-collision strip, lampshade, fuel tank cover, rear guard, mesh trim, welcome pedal, EPDM/TPE rubber seal and Other car mods.

Why to cooperate with adhesives？

1. It's not that the tape is not good, it's because the materials on both sides of the paste are different, resulting in poor adhesion

2. Rough, unsmooth surface and oil film will affect viscosity and durability

3. The bonding surface will be degummed after long-term exposure to high temperature and dust.

This is not glue and cannot be used as glue alone. Adhesion promoters are used to better bond the tape. You need to apply it on tape or any adhesive. So Need to be used together with double-sided tape for better use.

The main purpose of the primer is to strengthen the adhesive effect of films, tape or other self-adhesive materials. 94 Primer - -an indispensable assistant at the car wrapping vinyl film! Without it, no professional work done.

Instructions:

Step1: Prepare the primer.Step

2: Apply the primer to a clean, dry surface (simply ''paint'' the spot)

Step 3: Allow the primer to completely dry for 5 minutes.

Step 4: Apply the 3M tape product

Step 5: Allow 72 hours of dwell time before us.(80% Increase Viscosity)

Package includes:1 bottle 94 primer（as show）