Description
important!
Please note that with some cameras, closing the camera battery door is a necessary step to use the DC adapter kit. Please refer to our operation manual for the installation example of the dummy battery.
Advantage:
1. The Camera PD-BX Convertor can't only play the role of power adapter,It is different from most products on the market,The convertor With power status indicator and integrates 2 chips, one is used to identify PD and QC3.0/4.0 power, The other is used for 9V-24V wide voltage input, After the step-down treatment, the regulated output can effectively prevent high voltage, prevent high current, and prevent short-circuit, so it has multi-protection functions. If the dummy battery is connected, there are three important chips.
2. High-quality chips,DC-DC converter,high conversion efficiency,Good stability,quiescent current is small,while also serving to effectively suppress harmonic current noise.Using a wide range,suitable for most 7.2V-8.4V and 9V camera.
3. Compared with the ordinary USB Type-A (USB-A) power supply, the USB Type-C (USB-C) input PD power mode will get more power. Don't worry about the power bank will disconnect the power supply when the camera sleeps Output. If you use a Ordinary USB-A power supply,The camera will not be able to shoot at any time, when the camera is in smart sleep mode or standby mode, the Power bank usually disconnects the power output after one minute, which will miss the snapshot.
4. Replace the camera battery handle grip or carry more batteries,camera insert battery grip will too heavy,is not conducive to taking pictures.
After connecting to the correct PD and QC3.0/4.0 power adapter or power bank, the red indicator light will always be on when the power is on. Certain models of cameras may consume higher current, so please use a high-performance power supply.
Description：
Product name：QC3.0+PD18W Power Adapter；
Specifications：European regulations (round feet) US regulations (flat feet) British regulations (triangle feet)；
Product material：PC fire retardant material；
Input:：AC100-240V 50--60Hz; 0.6A；
Output：Type-C 5V/3A 9V/2.4A 12V/1.5A；
Output：USB-A 5V/3A 9V/2.4A 12V/1.5A；
USB-C cable length：53cm（can be customized longer）；
Input：PD 18W-65W.
The DC coupler has a built-in 150cm cable, and the connector size is male 5.5*2.1mm. This DC coupler is suitable for any power supply with DC 7.2V-8.4V / 2A-4A output, and its connector size matches DC 5.5*2.1mm.
It works with the following digital cameras:
For Canon Rebel SL2
For Canon Rebel SL3
For Canon Rebel T6i
For Canon Rebel T6s
For Canon Rebel T7i
For Canon Rebel T8i
For Canon EOS 77D
For Canon EOS 200D
For Canon EOS 200D II
For Canon EOS 250D
For Canon EOS 750D
For Canon EOS 760D
For Canon EOS 800D
For Canon EOS 850D
For Canon EOS 8000D
For Canon EOS 9000D
For Canon EOS RP Mirrorless Digital Camera
For Canon Kiss X8i
For Canon Kiss X9
For Canon Kiss X9i
For Canon Kiss X10
(Please check your original Power Adapter Charger model before placing an order)
Package Includes:
1x PD Charger adapter
1 x USB Type-C Power Cable (With 8V regulator, DC connector 5.5*2.1 Female)
1 x DR-E18 Spring Wire DC Coupler (male head 5.5*2.1mm)
1 x Manual
VERY IMPORTANT: The power of the mobile phone PD charger must be between 18W -65W, The camera can start normally. Only support 18W 30W 45W 60W 65W PD Wall charger / PD mobile power supply / PD Car charger to power the camera, please do not use other devices, otherwise the camera will be damaged. This device is only used to power the camera, Do not connect other devices at the same time, Otherwise, it will cause insufficient power supply.
Tip: As shown in the picture below, there are four types of charging plugs to choose from. Please pay attention to the options when purchasing, and do not buy the wrong charging plug.
[Big order]If you order more, contact us.we will give you a reasonable discount.Welcome to visit our shop for more accessories, if you need wholesale lots,please feel free to contact us, We are right here waiting for you.
