DIY 5Gbps PCI-E 1X to USB 3.0 PC Front Panel 4 Ports USB PCIe HUB Adapter with PCI Express Riser Card for Floppy Disk Drive Bay Feature: 1. Theoretically, the transmission rate can reach 5Gbps, the data transmission is stable, and the office efficiency is improved. 2. It can be used when installed, supports hot plugging, and can be unplugged directly after the data is transferred. 3. With the new SATA power supply interface, keyboard/U disk and other devices can be used normally without connection, and the connection can ensure the normal use of large-capacity mobile hard disks and other power-consuming devices. 4. OD5.5 thick wire, durable, PCIE X1 socket, thick gold finger contact is better. 5. Small board right-angle design, small area, stable and not easy to fall off, will not grab space with the surrounding graphics card, and will not affect the heat dissipation of the graphics card. Specification: Type: PCI-E 1X to front 4-port USB 3.0 card tray Chipset: NEC D720201 Bus mode: PCI-E X1 interface Compatible slots: PCI-E x1/x4/x8/x16 USB interface: 4 x USB3.0 ports Transmission rate: USB3.0 5Gb/s USB cable length: 60cm/23.62in Product size: 102x95x25.8mm/4.02x3.71x1.02in Support system: for Windows XP 32/64, for Windows 7 32/64, for Windows8, for Windows8.1, for Windows10 Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 

1 X Panel 1 X USB Cable 1 X PCI-E 1X Riser Card