Description
Evaluation Tool: PIC32MZ2048ECG100
Core: PIC32
Data bus width: 32 bit
Operating Supply Voltage: 7 V to 15 V
Digilent chip KIT Wi-FIRE PIC32MZ microcontroller board is a new generation of chip KIT WF32, and it is also the new PIC32MZ processor introduced by Microchip. chipKIT Wi-FIRE is based on the Arduino open source hardware prototyping platform. The board uses the same 43 available I/O pins and 12 analog inputs as the previous chip, the KIT WF32.
Wi-FIRE has 3.3 working voltage, 4 user LEDs, potentiometer, push button and high efficiency switch 3.3V switching power supply. There is a WiFi MRF24 and SD card on the board, both with dedicated SPI signals.
The microcontroller features a 32-bit MIPS processor core running at 200MHz, 2MB Flash program memory and 512K SRAM data memory. Wi-FIRE can be programmed using a Multi-Platform Integrated Development Environment (MPIDE). MPIDE is an environment based on the original Arduino IDE, modified to support PIC32. The board has a USB serial port interface for connecting to MPIDE. Wi-FIRE can be powered using USB or external power.
The microcontroller is fully compatible with the advanced Microchip MPLAB X IDE. Allows the MCU to work with all MPLAB X compatible system programmers/debuggers such as Microchip PICkit 3 or Digilent chipKIT PGM. Wi-FIRE is easy to use and suitable for beginners and advanced users to try out electronic and embedded control systems.
feature
Microchip® PIC32MZ2048EFG100 Microcontroller (200MHz 32-bit MIPS M5150, 2MB Flash, 512K RAM)
Microchip MRF24WG0MA WiFi Module
Micro SD card connector
USB 2.0 high-speed OTG controller with A and micro-AB connectors
50MHz SPI
43 available I/O pins
Four user LEDs
PC connection using USB A > mini B cable (not included)
12 analog inputs
3.3V working voltage
200Mhz operating frequency
7V to 15V input voltage (recommended)
30V input voltage (max)
0V to 3.3V analog input voltage range
High Efficiency, Switching 3.3V Supply Provides Low Power Operation
