Description
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 2 CH
Remote Control Distance:50m
Encode: EV1527
Frequency:315 or 433 MHz
Size: 68mm x 48mm x 15mm
Power Supply: 1 X 12V/23A Battery (NOT included)
2.Receiver
1)Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Decode: Fixed code, soldering
Power Supply (Operating Voltage): AC 220V 110V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-40‘C ~ 80’C
Size:55 mm x 24 mm x 17 mm
3.Package Included
2 x Receiver (with cover)
1/2 x Transmitter (no battery inside)
4.Learn code and Remove Code
Learn: input the power for the receiver,press the learning button and the LED indicator turns ON.Then press the transmitter key ,the indicator flashes some times and turns OFF,it means learning successfully.
Remove:keep pressing the learning button on the receiver about 5-8 seconds until the indicator turns ON and keep blinking,it means the codes are cleared successfully.
