95836166100 TPMS Tire Pressure Sensor Monitor for PORSCHE 911 997 Boxster Carerra GT Cayenne Cayman Volkswagen Audi 433Mhz

Category : Auto & Motorrad | Tragen Teile

USD 14.11USD 20.45

95836166100 TPMS Tire Pressure Sensor Monitor for PORSCHE 911 997 Boxster Carerra GT Cayenne Cayman Volkswagen Audi 433Mhz

Description
Specification

Description

CU3%]HB{[A$7Z}W%VR%SG0V1 Get more discount now!!

Description

Part Number: 95836166100 99760602100 95836166100 7PP907275F 7PP907275B 7PP907275D 4F0907275D Operating Frequency:433Mhz

Battery Life:ABOUT 5YEAR

Package Include: 1 / 4 pcs

Application

Please check the part number before purchasing replacements.
Please make sure that you are ordering the correct auto part for your vehicle.
If your not sure or don't know, please contact us.
Provide us with the VIN#, YEAR, MAKE, MODEL of your vehicle and we will double check and verify fitment for you.
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool.

Simplified Relearn: Auto Relearn (Please contact us for the Specific Relearn Procedures)

Note:

1.Please Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the part number or the picture to us confirm it before order.

2.【No sensor programming Required】 :

The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".

Simplified Relearn : Scal tool Relearn

Installation of TPMS is recommended to be performed only by trained professionals.

Tpms Reset Tutorial:

1. Loosen the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

Fit For