Description

5V Pro Mini Module Atmega168 Microcontrol Control Board QC3.0 Typy-C For Arduino Nano Replace V3.0 CH340 Atmega328 Bootloader

100% brand new and high quality

14 Digital input/output ports RX, TX D13, D2 ~~ of,

or 8 analog input port A0 to A7

The TTL level serial transceiver port RX/TX

6 PWM ports, D3, D5 , D6, D9, D10, D11

Using Atmel Atmega168P microcontroller

supports serial download

Support for external 5v~ 12V DC power supply

Support 9V battery-powered

clock frequency 16MHz

Dimensions:33.3 x 18.0 (mm)

Package Included:

1PSC Pro Mini Atmega168 Mini 168 Crystal Oscillator Board Module 16M 5V For Arduino Nano Replace Atmega328

ATmega328 running at 8MHz /16MHz with external resonator (0.5% tolerance)

Low-voltage board needs no interfacing circuitry to popular 3.3V/5V devices and modules (GPS, accelerometers, sensors, etc)

USB connection off board

Supports auto-reset

3.3V /5V regulator

Max 150mA output

Over current protected

Reverse polarity protected

DC input 3.3V up to 12V

On board Power and Status LEDs

Dimensions:

0.7x1.3" (18x33mm)

Less than 2 grams

Shipping List:

1PCS For Arduino pro min atmega328p board 3.3V/5V 8M /16M version

3PCS Gilded Pin

Mini USB CH340 Nano V3.0 ATmega168 Microcontroller Module SPI Interface 16Mhz 3.3V 5V for Emulator Program Debugger Development

Specification:NEW version - Nano V3 constructed on the ATmega168 microcontroller (16MHz) has the small size and can be used together with model boards for solderless wiring (breadboard). To reduce the size, components are mounted on both sides of the PCB.

The board uses a chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. With an operation frequency in 12Mhz, yields stable result of a data interchange (for correct installation of drivers on the computer follow the instruction).

Nano V3, can be powered via mini usb port (up to 500mA). External power supply 6-12V unregulated to output VIN, or 5V external power source to a regulate output of 5V. The power supply is automatically selected with the maximum voltage value.

This Nano ATmega168 have PinOut for V3, not V2.

Technical details:Nano V3 form-factor,ATmega168 (16Mhz) microcontroller,CH340G - USB-UART interface,Input voltage 6-12V,Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),Mini USB - connection socket,500mA resetable Fuse on USB port

Package Included:1PCS x Mini USB CH340 Nano V3.0 ATmega168 Microcontroller Module