Description

50KN Rock Climbing Descender Rescue Figure 8 Descender Bent-Ear Belaying and Rappelling Climbing Gear Downhill Equipment Aluminum Alloy Rigging Plate

Features:

1. Keep Your Safety: It uses the friction between the rope and the Descender device to slow down the descent or brake. Extra thick with ears and belay slot will keep your safety, even in a rescue or emergency situation.

2. Superior Braking Resistance: Breaking strength 11,000 lbf (50KN/5000kg). Allows for smooth rope action while descending or belaying, offers superb control on rope.

3. Figure 8 Descender: Big Wall Climbings Terminal 8 with Ears is an improvement over standard figure 8 devices with improved breaking and safety features.

4. EASY LOCK-OFF: With bent-ear, locking yourself off with both hands free will be much easier and safer.

5. It Applies To: Suitable for Mountain Climbing, Rock Climbing, Ice Climbing, Rescue, Working-At-Height, Technical Rope Rescue, Climbers, Cavers and Sport Rappelers

Specifications:

Name:   Figure 8 descender with ears

Material:  Aluminum alloy

Pull: 50KN(5000KG)

Size: width17cm    height17cm    

Color: black  red

Net weight: 240g

For the diameter of rope: 8-13mm

Multipurpose:  rock climbing， caving, expanding, rescue, rigging

Instructions: 01 Connect the descender to the load bearing ring on the  

                      safety harness

                      02 Run the rope through small and big rings

                      03 Turn the descender and link it to the small ring

                      04 Check if the installation and locking system

                      05 Double loop the rope around the descender  

                      06 Let the rope through the big ring and rig as shown

                      07 Undo the rigging

                      08 Descend steadily as shown

Friendly reminder: please check and maintain your gear in order to avoid  danger caused by misuse while working or playing at height