About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.

Package include:

Package List 1/2:1x 12V Receiver(with cover)1 x Transmitter(NO batte ）Package List 3:1x12VReceiver(with cover) Package List 4/5:1x 24V Receiver(with cover)1 x Transmitter(NO battery) Package List 6:1x24V Receiver(with cover)Package List 7/8:1 x Transmitter(NO battery)

Learning the code : ( Toggle )

Push the learning key on the receiver 2 times , it comes into toggle setting modeWait for a moment , the LED will be off , it comes into learning state .Push the remote button,LED indicator on the receiver board will flash then come off.After 3 seconds , the LED indicator will be on again , learning successfully .

Learning the code :( Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.For example : button A = ON , button B = OFFPush the learning key on the receiver 3 times , it comes into latching mode .Wait for a moment , the LED indicator on the receiver board will flash then come off.Push the remote button A .LED flash for 5 times .Push the remote button B .Led flash for 5 times .After 3 seconds , the LED indicator will be on again , learning successfully.A = ON , B = OFF .

Learning the code :( Time delay mode )

Push the learning key on the receiver 4 times , the time dealy for 5 seconds .Push the learning key on the receiver 5 times , the time delay for 10 seconds .Push the learning key on the receiver 6 times , the time delay for 15 seconds .The LED indicator will be off .Push the remote button , LED flashes and off .After 3 seconds , the LED indicator will be on again , learning successfully .

NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .